Nanaimo Forklift Training School

Nanaimo Forklift Training School - Forklift Training School - For The Safety Of Both The Machine And The User - Federal and industry regulators have established the criteria for forklift safety training based on their current regulations and standards. Those wishing to operate a forklift should finish a forklift training School before utilizing one of these machinery. The accredited Forklift Operator Training Program is designed to offer those training with the practical skills and knowledge to become an operator of a forklift.

There are forklift operation safety regulations that should be followed pertaining to pre-shift inspections, and regulations for lifting and loading.

An inspection checklist should be done and submitted to the supervising authority prior to beginning a shift. When a maintenance problem is uncovered, the use of the specific machine must be stopped until the problem has been dealt with. To be able to indicate the equipment is out of service, the keys have to be removed from the ignition and a warning tag placed in a spot that is seen.

Loading safety rules include checking the forklift nameplate's rating capacity and determining if the load weight falls within capacity. The forklift forks should be in the down position when the forklift is starting up. Don't forget that there is a loss of approximately one hundred pounds carrying capacity for every inch further away from the carriage that the load is carried.

Lifting must start with the driver moving to a stopped position roughly three inches from the load. The mast must then be leveled until it has reached a right angle with the load. Raise the forks to an inch below the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to warn other employees. Never allow forks to drag on the ground.

Click to Download the pdf